Face Cream & Moisturizer OEM: Formulation Guide

8OEM formulation guide · Emulsion systems, key actives, stability testing · 2026-11-11

If you are a brand founder or procurement buyer sourcing face creams and moisturizers from a Chinese OEM, the formulation details matter as much as the price. A moisturizer is not just water and oil mixed together; it is a carefully balanced emulsion system where humectants, emollients, occlusives, emulsifiers, thickeners, and preservatives must work together to deliver texture, stability, and skin feel. This guide walks you through the key decisions in oil-in-water (O/W) emulsion formulation, from ingredient selection to stability testing and private label customization, so you can ask the right questions and compare OEM partners with confidence. For a broader view of how we work, see our cosmetic OEM services.

1. Why Oil-in-Water Emulsions Dominate Face Creams

Oil-in-water (O/W) emulsions are the most common format for face creams and moisturizers because they combine a light, non-greasy skin feel with effective delivery of water-soluble actives and humectants. In an O/W system, oil droplets are dispersed in a continuous water phase, stabilized by emulsifiers. This structure allows formulators to load high water content, which is cost-effective and refreshing, while still incorporating emollients and occlusives for barrier support.

Water-in-oil (W/O) emulsions, by contrast, feel richer and are often used for cold creams or heavy night creams. For most daily moisturizers, O/W is preferred. The challenge lies in keeping the emulsion stable: droplets tend to coalesce, leading to creaming or phase separation. The choice of emulsifier system, oil phase composition, and viscosity control are critical. At 8OEM, our formulation team typically starts with an O/W base and adjusts the emulsifier blend (e.g., glyceryl stearate with PEG-100 stearate, or cetearyl alcohol with polysorbate 60) to match the desired texture and stability profile.

2. Key Humectants: Glycerin and Hyaluronic Acid

Humectants attract and hold water in the stratum corneum, improving hydration and pliability. Glycerin is the workhorse: inexpensive, well-tolerated, and effective at low percentages (3–8%). It also aids preservative efficacy and can improve freeze-thaw stability. Hyaluronic acid (HA) is a premium humectant that can hold many times its weight in water. In formulations, low-molecular-weight HA penetrates deeper for hydration, while high-molecular-weight HA forms a film on the surface. Typical use levels are 0.1–1% for HA (depending on molecular weight and desired claim).

Other humectants include propylene glycol, butylene glycol, panthenol, and sodium PCA. When formulating, remember that humectants can make a cream feel tacky if overused. Balance is key. For a lightweight gel-cream, you might combine glycerin with a low level of HA and a touch of panthenol. For a rich night cream, higher glycerin and HA can be supported by emollients. Our custom formula development guide explains how we adjust humectant ratios during sampling.

3. Emollients and Occlusives: The Barrier Builders

Emollients soften and smooth the skin by filling gaps between corneocytes, while occlusives form a hydrophobic film that reduces transepidermal water loss (TEWL). In O/W emulsions, emollients also influence texture and spreadability. Common emollients include:

Occlusives such as petrolatum, beeswax, and lanolin are heavier and typically used at lower percentages in O/W systems to avoid greasiness. Petrolatum is highly effective but may not suit clean-beauty positioning. For vegan claims, avoid beeswax and lanolin; use plant-based alternatives like candelilla wax or rice bran wax. 8OEM supports halal, vegan, and clean-beauty positions, so we can tailor the emollient/occlusive system accordingly.

4. Viscosity and Rheology Control

Rheology modifiers give a cream its body, spreadability, and stability. In O/W emulsions, thickeners build viscosity in the water phase and help suspend oil droplets. Common options include:

The goal is a yield stress high enough to prevent creaming but low enough to allow easy dispensing. Over-thickening can lead to a heavy, tacky feel; under-thickening risks phase separation. Our formulators use a combination of emulsifier and thickener to achieve the desired viscosity (typically 20,000–80,000 cps for a face cream) and stability. During sampling, we test spreadability, absorption, and after-feel with a small sensory panel.

5. Stability Challenges: Phase Separation and Creaming

Emulsion instability manifests as creaming (upward migration of oil droplets), sedimentation, flocculation, coalescence, or phase separation. Creaming is common when the density difference between oil and water phases is large or when the droplet size is uneven. To mitigate:

At 8OEM, every formula undergoes stability testing before production. We also check compatibility with packaging (e.g., pump dispensers, jars) to avoid interactions. For more on our quality processes, see the quality control guide.

6. Preservation: Protecting the Emulsion

Preservatives are essential in O/W emulsions because the water phase supports microbial growth. The challenge is to find a broad-spectrum preservative that is effective at low levels, compatible with other ingredients, and meets regulatory requirements in target markets. Common systems include phenoxyethanol with ethylhexylglycerin, or sodium benzoate with potassium sorbate for a more natural profile. For EU compliance, ensure the preservative is listed in Annex V and within allowed concentrations.

Preservative efficacy testing (PET) or challenge testing is required to confirm the system works. 8OEM conducts PET according to ISO 11930 or equivalent. If you are targeting the EU, you will also need a Responsible Person and CPNP notification; for the US, MoCRA requires facility registration and product listing. We can guide you through these steps but do not act as your legal representative. Our team can recommend preservative systems that align with your clean-beauty or paraben-free claims.

7. MOQ and Customization for Private Label Brands

Minimum order quantities (MOQs) for face creams typically range from 3,000 to 10,000 units per SKU, depending on the formula complexity and packaging. At 8OEM, we offer flexible MOQs for startups and growing brands; our standard MOQ is 5,000 units for custom formulas, but we can discuss lower volumes for stock formulas. Customization options include:

We recommend starting with a sampling round to refine the formula before committing to bulk production. Our sampling lead time is typically 7–15 days, and we provide detailed specifications. For cost considerations, see our OEM cost and pricing guide.

Ready to develop your own face cream or moisturizer? 8OEM is a Guangzhou-based OEM/ODM manufacturer with in-house formulation, sampling, and production for brands exporting to the EU, US, China, and the Middle East. Contact us at /contact.html or call +86-15622220825 to discuss your project. We can help you navigate formulation, stability, preservation, and regulatory documentation—honestly and without shortcuts.

Frequently Asked Questions

What is the typical MOQ for a custom face cream?

MOQs vary by formula and packaging, but a common range is 5,000–10,000 units per SKU. 8OEM offers flexible MOQs, including lower volumes for stock formulas, to support startups and growing brands.

How long does stability testing take for an emulsion?

Accelerated stability testing typically takes 4–12 weeks, including 4 weeks at elevated temperature and freeze-thaw cycles. Real-time testing may take 6–12 months, but accelerated methods help predict long-term stability.

Can you formulate a face cream that is both vegan and halal?

Yes. We can select plant-based emollients, waxes, and emulsifiers that are free from animal derivatives and alcohol, and source ingredients with halal certification where needed. We will provide documentation for your claims.

Do you provide preservative efficacy testing (PET)?

Yes, we conduct PET according to ISO 11930 or equivalent standards to ensure your preservative system is effective. This is part of our standard quality control for emulsions.

广州华宝堂生物科技服务有限公司 | 粤ICP备15105990号

Get a price & MOQ for your product

Tell us the product, target quantity and packaging. We reply with an indicative unit price, MOQ tiers and lead time — normally within 24 hours (GMT+8 business hours).

Prefer to talk? WhatsApp +86 156 2222 0825 · 27005046@qq.com